With regard to the detection of bucket mould products, Seaco generally needs to do a drop test of the test barrel at a height of 1.5 meters. I would like to introduce some drop bucket test.
For the paint bucket strength test, we must consider three points:
1. Barrels and lids must be well assembled, otherwise the lids will fall apart and leak after painting;
2. The thickness of the barrel should be reasonable, and some people always want to reduce the thickness of the barrel to reduce costs. This is difficult to ensure quality, reasonable thickness can save costs while ensuring quality.
3. Material selection: This is very important, people usually use high-density polyethylene or polypropylene material barrels, but there are many kinds of each material, it is best to choose a higher hardness and cold resistance is better, heat Made of low deformation temperature material because it can provide better impact resistance.