Vertical injection molding machine

- Apr 04, 2018-

1. The injection device and the mold clamping device are on the same vertical centerline, and the mold is opened and closed in the up and down direction. Its floor area is only about half that of a horizontal machine. Therefore, it is about twice as much as converting to an area.

2, easy to insert molding. Because the mold surface is facing upwards, inserts are easily positioned. With the use of the lower die plate type and the upper die plate movable type, the pull tape conveying device is combined with the robot hand, and the automatic insert molding can be easily realized.

3, the weight of the mold is supported by the horizontal template to open and close up and down, and it will not cause the phenomenon that the template cannot be opened and closed due to the forward fall caused by the gravity of the mold similar to the horizontal machine. Helps maintain durability of machinery and molds.

4, through a simple robot can remove the plastic parts cavity, is conducive to precision molding.

5, generally around the mold clamping device is open, easy to configure all types of automation devices, adapted to the complex, sophisticated products of automatic molding.

6, pull belt conveyor device easy to achieve the middle of the string through the installation, easy to achieve automatic production molding.

7. It is easy to ensure consistency of resin flow and mold temperature distribution within the mold.

8, equipped with a rotating table, mobile table and inclined table and other forms, easy to achieve insert molding, mold molding.

9. In small batch trial production, the mold construction is simple and low cost, and it is easy to uninstall.

10, has stood the test of many earthquakes, vertical machine due to low center of gravity, relative horizontal machine earthquake resistance is better.